Features:

• Peerless #LCS-KLA LCD Screen ADJWallMount
• PEERLESS INDUSTRIES, INC

Editor Reviews:

Product Description:
The Peerless LCD Flat Panel Articulating Wall Mount provides a cost-effective mounting solution for 10" to 22" LCD at panel screens. Extremely flexible, this mount folds at against the wall to a slim 2" depth or extends out up to 15.25". Its silver finish elegantly complements conference rooms, merchandising displays, hotel rooms or any room in the home. This two-link arm provides easy, one-touch tilt and up to 180 degrees of swivel for optimal screen positioning. The LCS-KLA comes completely pre-assembled for a fast and easy installation.

Rating : - Review and installation advisory
I purchased this unit to solve an awkward placement problem. The mount had to be fastened near a corner but allow the LCD to extend past a nearby cabinet. None of my local stores had mounts that approached the range of this unit. I was impressed by the robustness and nice finish of the unit I received. The setup also provided plenty of hardware including two sets of screws (short and long) and even spacers to accomodate a wide range of LCD's. Other hardware in the package included adjustment wrenches, wall screws and even cable ties. I cut a piesce of cardboard to mimic the LCD and taped it to the arm. I used this assembly to test the placement of the arm before I drilled the holes. The mounting plate has holes for both 75mm x 75mm and 100mm x 100mm VESA compliant LCDs. Make sure your LCD has these holes before ordering. It took me less than 1/2 hour to have the mount and LCD installed.

Install Advisory: I felt the tilt mechanism was too tight. After some investigation, I pried the plastic caps covering the tilt screw heads off with a small screw driver. Once off, I observed that the tilt screw can be adjusted with the one of the supplied wrenches. I lessened the tension (keeping it relatively firm), mounted the LCD, then made the final adjustment allowing the LCD to be tilted without too much force but not drooping. I pressed the plastic caps back on.

I am pleased with this product and its low price. I recommend it.